Controlling Spotify through Applescript & Quicksilver.

Update Available: http://www.jacktams.co.uk/2009/10/09/spotify-applescripts-updated/

I have almost solely being listen to music through spotify for the last couple of weeks, sure it doesn't replace iTunes but its damn good at what it does, all you can eat music for free. http://www.spotify.com/

The Problem:
Spotify can use the built in shortcuts for play/pause, forward and reverse, but if like me you use a different keyboard and effectively 'dock' you Macbook its not much use. Enter Quicksilver, the perennial quick-launch and whiz-kid short-cutter for mac. http://bit.ly/yrlr7

I already have a load of triggers set up within quicksilver for everything from make an event in iCal to post a tweet or send email.

So getting Spotify in there, it turns out Applescript is here to help, using the System Events helper you can select a menu item without actually clicking it. Below is the code for the main actions you would want in Spotify. Simply save the apple script, then attach it to a trigger in Quicksilver. Hey Presto, magic! For more details on setting up triggers check the Quicksilver wiki, it explains it alot better than I ever could. http://bit.ly/134dnL

Play Next

tell application "Spotify" to activate
tell application "System Events"
   tell process "Spotify"
      click menu item 3 of menu 1 of menu bar item 5 of menu bar 1
   end tell
end tell

Play Previous

tell application "Spotify" to activate
tell application "System Events"
   tell process "Spotify"
      click menu item 4 of menu 1 of menu bar item 5 of menu bar 1
   end tell
end tell

Play/Pause

tell application "Spotify" to activate
tell application "System Events"
   tell process "Spotify"
      click menu item 1 of menu 1 of menu bar item 5 of menu bar 1
   end tell
end tell

Notes:
Don't forget to activate assitive device support see http://www.macspeech.com/extensions/faq/kb.php?article=48

18 thoughts on “Controlling Spotify through Applescript & Quicksilver.”

seventy6 May 21, 2009 at 16:45

cheers. been looking for something like this for ages. perfect!

stubee June 16, 2009 at 22:16

Any luck with a search function? Too much to ask?

Jack Post authorJune 17, 2009 at 21:51

I don’t think search is possible, because the app isn’t in cocoa. The only reason the above stuff works is because you can access an menus of an app from Applescript. But not all the interface is available to you.

Peter Dickson June 20, 2009 at 12:01

Hey Jack!

I’ve recently bought my first Mac… a MacBook!

Found Quicksilver and Spotify and have followed your instructions, with no joy.

I had to create ~/Library/Application Support/Quicksilver/Actions folder. Is that right? It contains two files now… PlayNextSpotify.scpt and PlayPauseSpotify.scpt. I’ve relaunched QS and attached the Actions to triggers.

If you can help, thanks!

Great blog, btw.

cheers

Pete

Tom Long June 29, 2009 at 19:59

Peter Dickson, the problem might not be related to Quicksilver. For this scriot to work, you need to have a feature called ‘Access for assistive devices’ enabled. You can turn it on with the checkbox at the bottom of the Universal Access pane of System Preferences.

Jack Post authorJune 29, 2009 at 21:39

Oops, I completely forgot about the assistive devices thing. Yes, that would explain why the script doesn’t work.

Paul July 21, 2009 at 10:04

Hi Jack, nice tip! Would this work with the “Extra Scripts” quicksilver plugin? That way I wouldn’t have to make a ton of trigger shortcuts, which I’d have to remember…

Parker July 29, 2009 at 17:48

Hi all,

I’ve gotten the scripts to work with keyboard shortcuts via quicksilver, but I’m each time I use them Spotify becomes the active application. I’m new to applescript, but I was wondering if there was a command that would reset the application after running the script.

Thanks!

Tim Jones August 14, 2009 at 17:20

Parker,

Try storing the name of the active application before activating spotify thus:

tell application “System Events” to set appList to ¬
name of application processes whose frontmost is true

set activeApp to item 1 of appList

tell application “Spotify” to activate
tell application “System Events”
tell process “Spotify”
click menu item 1 of menu 1 of menu bar item 5 of menu bar 1
end tell
end tell

tell application activeApp to activate

Regards,

Tim

Ivan August 21, 2009 at 18:06

Hi!
Very good scripts.
I have the same keys for iTunes and Spotify, so when I’m using iTunes, and I press F8 (forward), Spotify starts even if it wasn’t opened. That’s is very annoying, so I search for a simple applescript command.
If Spotify is opened, then go to the next song in Spotify.
That I have get it work with the following Script:

tell application “System Events”
set MyList to (name of every process)
end tell
if (MyList contains “Spotify”) is true then
tell application “Spotify” to activate
tell application “System Events”
tell process “Spotify”
click menu item 3 of menu 1 of menu bar item 5 of menu bar 1
end tell
end tell
end if

Is for forward, but can be right for the other scripts.

I hope this helps

Peck September 11, 2009 at 02:15

Thanks for the script and all the additions. I combined tim’s and ivan’s script to make this which should be easier for newbies at applescript (like me!) to just copy and paste.

tell application “System Events”
set MyList to (name of every process)
end tell

tell application “System Events” to set appList to ¬
name of application processes whose frontmost is true

set activeApp to item 1 of appList

if (MyList contains “Spotify”) is true then
tell application “Spotify” to activate
tell application “System Events”
tell process “Spotify”
click menu item 1 of menu 1 of menu bar item 5 of menu bar 1
end tell
end tell
tell application “System Events”
set visible of process “Spotify” to false
end tell
end if

tell application activeApp to activate

Blind Rocket September 27, 2009 at 15:59

I’ve written a tip how to search on Spotify with Quicksilver:
http://blindrocket.blogspot.com/2009/09/searching-spotify-with-quicksilver.html

Pingback: Spotify Applescripts – Updated

Pingback: Apple Mac and iPhone Apps for Spotify | Pansentient League - a Spotify Blog

Jho May 3, 2010 at 10:50

After the spotify update the menus have changed slightly and the currect menu bar item is now 6 (For Play/Pause : click menu item 1 of menu 1 of menu bar item 6 of menu bar 1)

Jack Post authorMay 27, 2010 at 14:28

Updated Scripts Available here: http://www.jacktams.co.uk/2010/04/28/spotify-applescripts-version-0-4-3/

Pingback: stev.ie/ » Blog Archive

seventy6 May 21, 2009 at 16:45

cheers. been looking for something like this for ages. perfect!
stubee June 16, 2009 at 22:16

Any luck with a search function? Too much to ask?
Jack Post authorJune 17, 2009 at 21:51

I don’t think search is possible, because the app isn’t in cocoa. The only reason the above stuff works is because you can access an menus of an app from Applescript. But not all the interface is available to you.
Peter Dickson June 20, 2009 at 12:01

Hey Jack!

I’ve recently bought my first Mac… a MacBook!

Found Quicksilver and Spotify and have followed your instructions, with no joy.

I had to create ~/Library/Application Support/Quicksilver/Actions folder. Is that right? It contains two files now… PlayNextSpotify.scpt and PlayPauseSpotify.scpt. I’ve relaunched QS and attached the Actions to triggers.

If you can help, thanks!

Great blog, btw.

cheers

Pete
Tom Long June 29, 2009 at 19:59

Peter Dickson, the problem might not be related to Quicksilver. For this scriot to work, you need to have a feature called ‘Access for assistive devices’ enabled. You can turn it on with the checkbox at the bottom of the Universal Access pane of System Preferences.
Jack Post authorJune 29, 2009 at 21:39

Oops, I completely forgot about the assistive devices thing. Yes, that would explain why the script doesn’t work.
Paul July 21, 2009 at 10:04

Hi Jack, nice tip! Would this work with the “Extra Scripts” quicksilver plugin? That way I wouldn’t have to make a ton of trigger shortcuts, which I’d have to remember…
Parker July 29, 2009 at 17:48

Hi all,

I’ve gotten the scripts to work with keyboard shortcuts via quicksilver, but I’m each time I use them Spotify becomes the active application. I’m new to applescript, but I was wondering if there was a command that would reset the application after running the script.

Thanks!
Tim Jones August 14, 2009 at 17:20

Parker,

Try storing the name of the active application before activating spotify thus:

tell application “System Events” to set appList to ¬
name of application processes whose frontmost is true

set activeApp to item 1 of appList

tell application “Spotify” to activate
tell application “System Events”
tell process “Spotify”
click menu item 1 of menu 1 of menu bar item 5 of menu bar 1
end tell
end tell

tell application activeApp to activate

Regards,

Tim
Ivan August 21, 2009 at 18:06

Hi!
Very good scripts.
I have the same keys for iTunes and Spotify, so when I’m using iTunes, and I press F8 (forward), Spotify starts even if it wasn’t opened. That’s is very annoying, so I search for a simple applescript command.
If Spotify is opened, then go to the next song in Spotify.
That I have get it work with the following Script:

tell application “System Events”
set MyList to (name of every process)
end tell
if (MyList contains “Spotify”) is true then
tell application “Spotify” to activate
tell application “System Events”
tell process “Spotify”
click menu item 3 of menu 1 of menu bar item 5 of menu bar 1
end tell
end tell
end if

Is for forward, but can be right for the other scripts.

I hope this helps
Peck September 11, 2009 at 02:15

Thanks for the script and all the additions. I combined tim’s and ivan’s script to make this which should be easier for newbies at applescript (like me!) to just copy and paste.

tell application “System Events”
set MyList to (name of every process)
end tell

tell application “System Events” to set appList to ¬
name of application processes whose frontmost is true

set activeApp to item 1 of appList

if (MyList contains “Spotify”) is true then
tell application “Spotify” to activate
tell application “System Events”
tell process “Spotify”
click menu item 1 of menu 1 of menu bar item 5 of menu bar 1
end tell
end tell
tell application “System Events”
set visible of process “Spotify” to false
end tell
end if

tell application activeApp to activate
Blind Rocket September 27, 2009 at 15:59

I’ve written a tip how to search on Spotify with Quicksilver:
http://blindrocket.blogspot.com/2009/09/searching-spotify-with-quicksilver.html
Pingback: Spotify Applescripts – Updated
Pingback: Apple Mac and iPhone Apps for Spotify | Pansentient League - a Spotify Blog
Jho May 3, 2010 at 10:50

After the spotify update the menus have changed slightly and the currect menu bar item is now 6 (For Play/Pause : click menu item 1 of menu 1 of menu bar item 6 of menu bar 1)
Jack Post authorMay 27, 2010 at 14:28

Updated Scripts Available here: http://www.jacktams.co.uk/2010/04/28/spotify-applescripts-version-0-4-3/
Pingback: stev.ie/ » Blog Archive
Pingback: stev.ie/ » Blog Archive

jack.sh &

Controlling Spotify through Applescript & Quicksilver.

Like this:

18 thoughts on “Controlling Spotify through Applescript & Quicksilver.”

Leave a Reply Cancel reply

Share this:

Like this:

18 thoughts on “Controlling Spotify through Applescript & Quicksilver.”

Leave a Reply Cancel reply